Pivot Pendant / Stabilizer Kickstand Adapter

THIS IS JUST THE ADAPTER, NO STRAP lNCLUDED

————————-

When Made With ASA Filament 

- Superior UV  & Water/ Weather Resistance (making it the best filament to use for outdoor applications) 

- Temp Resistance of slightly over 210*f ( this will not deform out in the sun, if you leave it in your car on the hottest day of the summer ) (or warp due to super humid environment) 

- you can even sand the adapter, apply adhesive paint primer and paint it! 

——————————-

- best way to clean 

While a quick wipe might be harmless, prolonged contact or soaking can cause damage, making the surface cloudy, brittle, or cracked.

A far safer method for cleaning ASA plastic is using warm, soapy water with a mild detergent. 

—————————————

This filament requires careful temperature control during printing to prevent warping, requiring higher-end machines to print. The fumes that off-gas during the printing are highly toxic, and require additional ventilation as well. 

This factor was considered when determining what to price this adapter for.

if you wanted to take the extra steps 🤘😁 Asa has special properties so that you can paint it, even vapor smooth it with acetone( look it up) 

—————-——— 

WHEN MADE WITH PRO PCTG 

- quite a bit more expensive filament vs ASA

- is capable of withstanding temps of between

(140F - 160F)

- not as UV resistant or as water resistant as ASA, though is still excellent! If you intended to leave the adapter outside in the elements long term, or frequently use backlights- ASA would technically  be better suited for the task. 

- Excellent Chemical Resistance: PCTG can handle exposure to various chemicals without degrading, suitable for items in contact with oils, solvents, or cleaning agents. 

-This means that you can wipe down with 99% iso 🤘😤

- PCTGs makeup is more transparent than ASA (generally opaque) also. This allows for more color options including clear! 

BUT WHAT IS THE PIVOT PENDANT ADAPTER?  

Walk around wearing your pivot vs keeping it in your pocket frees up pocket space and makes the pivot easier to access! 

The top ring is meant to attach to the Silicone sleeve, while the bottom ring attaches to the device itself, as shown in the pictures above 👆 

—————————

Putting It On And Taking It Off 

Install is as easy as just pushing the adapter onto the pivot

Those two notches  on the adapter are actually little handles - so taking it off is just as easy as putting it on!

With one thumb on each handle, press and pop off the adapter. There is a video demonstration attached above 👆