This Stabilizer Station is designed to loosely snap into the bottom of the Puffco Peak Pro V2

To properly attach to the Peak 

1. Prior to pressing the device into the station, make sure  the charger port on the Peak is  line up with the station tab in the back. 
2. Do not press forward / on the front of the device to lock it in place. Press on the back of the Puffco device to lock it into the station. Pressing on the front of the device will easily allow you to detach the station from your device.

To properly detach from the Peak

1. Pressing on the front of the device will easily allow you to detach the station from your device.

This Station Includes:

1. 10mm x 2mm Neodymium Magnets Pre-Installed
2. 1 Stainless Steel Dab Tool ( Pick on one end / Shovel on other End)
3. 1 Swab Slot that fits up to 14 Q-Tips cotton swabs
4. 1 L.O.C. dock you can place your L.O.C. or other carb cap on while loading a dab

————————————-

When Made With ASA Filament 

- Superior UV  & Water/ Weather Resistance (making it the best filament to use for outdoor applications) 

- Temp Resistance of slightly over 210*f ( this will not deform out in the sun, if you leave it in your car on the hottest day of the summer ) (or warp due to super humid environment) 

- you can even sand the adapter, apply adhesive paint primer and paint it! 

——————————-

- best way to clean 

While a quick wipe might be harmless, prolonged contact or soaking can cause damage, making the surface cloudy, brittle, or cracked.

A far safer method for cleaning ASA plastic is using warm, soapy water with a mild detergent. 

—————————————

This filament requires careful temperature control during printing to prevent warping, requiring higher-end machines to print. The fumes that off-gas during the printing are highly toxic, and require additional ventilation as well. 

This factor was considered when determining what to price this adapter for.

if you wanted to take the extra steps 🤘😁 Asa has special properties so that you can paint it, even vapor smooth it with acetone( look it up) 

—————-——— 

WHEN MADE WITH PRO PCTG 

- quite a bit more expensive filament vs ASA

- is capable of withstanding temps of between

(140F - 160F)

- not as UV resistant or as water resistant as ASA, though is still excellent! If you intended to leave the adapter outside in the elements long term, or frequently use backlights- ASA would technically  be better suited for the task. 

- Excellent Chemical Resistance: PCTG can handle exposure to various chemicals without degrading, suitable for items in contact with oils, solvents, or cleaning agents. 

-This means that you can wipe down with 99% iso 🤘😤

- PCTGs makeup is more transparent than ASA (generally opaque) also. This allows for more color options including clear!