1 3

Terp Trap- Puffco

zharrisondesign

$40.00 USD
$40.00 USD
Sale Sold out
Shipping calculated at checkout.
Whats the difference between the Terp Trap and the Terp Tunnel?

The major difference between the terp trap and tunnel is that the trap is completely closed off from the noodle - so whatever your loading in there - the odor of it won’t go down through the that noodle into the crucible  and possibly be a flavor blast. it’s more for storage / twists the cap off to smell what’s inside without adulterating your dabs -
 I have a closed top, and a top with a hole in it. No hole = better preservation when on the go - - - hole w screen= can smell while leaving the thread cap on, I include a screen with open tops so you don’t snort up anything accidentally 

Terp tunnel there’s a screen on the bottom because the passage to the noodle is open, and whatever you load in there, air will pass over it before going down through the crucible - so if carb caps are for directional airflow, all of that air passes over the loaded material first 

So you don’t vaporize anything in the top of either 

 

Thread L.O.C  (lift off cap)

What makes this different than other joystick caps? 

This particular version has a threaded vial top, which can be used to store ___

The others have 2 Maria’s (bumps) on the noodle so that the grommet seats in the crevice between them. when you gyrate the cap, it won’t sling out for that reason, or get pushed down through the grommet into the crucible (lose ability to gyrate) 

Glassblowers put those two notches in - in order to prevent that. The one downside to this style cap is that it makes it necessary to take the entire flux cap grommet off of the crucible to clear your piece. This can interfere with the fluidity of your dabbing( fiddling with the grommet to get the cap back into place), and also causes wear and tear on that silicone sleeve. 

 My cap has just the one maria (bump).  When you adjust the grommet as demonstrated in the attached video, as long as your putting some minimal pressure down on the top of the cap when your gyrating it, no matter how hard you get at it, it wont sling out. 

———————-

The Puffco pro 3D and 3DXL models fit their respective stock sleeve systems - although you would want to insert the LOC in the same way demonstrated in the first video- when I was using the flux cap grommet 

The Puffco 3dxl LOC is compatible with the voozr grommet/chamber 

If cleaning the cap with isopropyl alchohol  - do not soak the cap in the iso- if needed, take a qtip swab and wipe it.